Sysmex CS-5100 automated coagulation analyzer

Sysmex CS-5100 automated coagulation analyzer

A high-volume, fully automated coagulation analyzer that runs clotting, chromogenic, immunoassay and platelet aggregation tests on one platform, at up to 400 tests per hour. Milap International supplies, installs and services the CS-5100 for large hospital and reference laboratories across Karnataka.

  • Up to 400 tests/hour PT and PT/APTT
  • 4 methods clotting, chromogenic, immunoassay, aggregation
  • HIL check haemolysis, icterus and lipaemia before testing
  • Lab automation ready direct sampling from a track

What is the Sysmex CS-5100?

The Sysmex CS-5100 is a high-volume, fully automated coagulation (haemostasis) analyzer. It uses multi-wavelength detection at 340, 405, 575, 660 and 800 nm across 20 channels to run clotting, chromogenic, immunoassay and platelet aggregation tests in full random access, and it checks each sample for haemolysis, icterus, lipaemia and volume before analysis.

Key features

Four methods on one analyzer

Clotting, chromogenic, immunoassay and platelet aggregation, consolidating routine and specialty testing.

Pre-analytical sample check

Haemolysis, icterus, lipaemia (HIL) and primary tube volume are checked, and questionable samples are flagged.

Platelet aggregation

Automated aggregation with ADP, epinephrine, collagen, arachidonic acid and ristocetin, plus platelet-based von Willebrand factor activity.

High throughput

Up to 400 tests per hour with continuous loading of 10 racks and 5 dedicated STAT positions.

Automation connectivity

Direct sampling from a laboratory automation track or the Sysmex haemostasis transport system, without robotic arms.

Clot waveform analysis

First and second derivatives of the clot curve are available for research use.

Specifications

SpecificationSysmex CS-5100
Detection principleMulti-wavelength detector for transmitted light at 340, 405, 575, 660 and 800 nm
Channels20 for clotting, chromogenic and immunoassays (8 also used for platelet aggregation)
ParametersUp to 60 analysed simultaneously
ThroughputPT: 400 tests/hour; PT/APTT: 400 tests/hour
SamplingContinuous loading of up to 10 racks of 10 tubes; cap-piercing; 5 dedicated STAT positions; direct sampling from an automation track
Reagent positions40 tilted, cooled (10 °C), 10 with mixing; 5 at room temperature; positive reagent identification
Quality controlX-bar and Levey-Jennings; Westgard multi-rule; 750 files of up to 1,200 points
Data storageUp to 10,000 results with reaction curves
Dimensions / weightMain unit 1,030 × 1,280 × 1,150 mm, about 278 kg; pneumatic unit 280 × 400 × 355 mm, about 17 kg

Test menu: PT, APTT, fibrinogen, thrombin time, batroxobin time, factors II, V, VII, VIII, IX, X, XI and XII, lupus anticoagulant screen and confirm, protein C pathway, antithrombin, D-dimer, von Willebrand factor and chromogenic assays, plus platelet aggregation and factor XIII. Reagent availability varies by country; ask us for the current menu in India.

Who is the CS-5100 for?

Large hospital, teaching and reference laboratories with a high coagulation workload, labs that run specialty tests such as platelet aggregation and von Willebrand testing, and labs connected to laboratory automation.

Installation, training and service

Installation and commissioning

Site check, set-up, calibration and first-run verification by Milap engineers, including LIS connection.

Application training

Hands-on training on PT/INR, APTT, fibrinogen, QC and daily maintenance.

Reagents and controls

Genuine reagents, calibrators and controls for your test menu, supplied from Bengaluru.

AMC, CMC and breakdown support

Preventive maintenance plans, with breakdown calls answered during evenings and weekends.

Frequently asked questions

Clotting, chromogenic, immunoassay and platelet aggregation tests, including PT, APTT, fibrinogen, D-dimer, factor assays, lupus anticoagulant, antithrombin, protein C and S, von Willebrand factor and factor XIII.

Up to 400 tests per hour for PT, and 400 per hour for PT and APTT together.

Yes. It automates platelet aggregation with ADP, epinephrine, collagen, arachidonic acid and ristocetin.

Yes. It checks haemolysis, icterus, lipaemia and primary tube volume before analysis and flags questionable samples.

Yes. It can sample directly from a laboratory automation track or the Sysmex haemostasis transport system.

Yes. Milap engineers plan the site, install and commission the analyzer, connect it to your LIS, train your staff, and offer AMC or CMC with breakdown support from Bengaluru.

From Milap International in Bengaluru. We supply, install and service the CS-5100 for laboratories across Karnataka.

It depends on your test menu, daily volume, automation connection and the reagent and service plan. Request a quote and we will send a written price.

Get a quote for the Sysmex CS-5100

Tell us your daily coagulation volume and specialty tests, and we will compare the CS-5100 with the CN-Series for your lab.