Installation and commissioning
Milap engineers check your site, set up the equipment, calibrate it, connect it to your LIS or HIS and verify the first runs, so it is ready for patients from day one.
- Site checkSpace, power, water and network
- Delivery and set-upUnpacking and assembly by our engineers
- CalibrationCalibration and quality control
- LIS/HIS linkResults flow to your system
- HandoverFirst-run check and training
What is installation and commissioning?
Installation is the physical set-up of the equipment at your site. Commissioning is the set of checks that proves it works correctly there: calibration, quality control, connection to your information system and a verified first run. Milap International does both with its own engineers for every system it supplies in Karnataka.
Blood gas analyzers are typically running within 24 to 48 hours of delivery; larger systems depend on site readiness.
What is included
Site check
We confirm space, power, earthing, water, drainage, temperature and network points before delivery.
Set-up
Unpacking, assembly and placement by trained engineers.
Calibration and QC
The system is calibrated and controls are run to confirm performance.
LIS/HIS connection
Interfacing so results reach your lab or hospital system automatically.
First-run verification
The first samples are run with your team watching.
Handover
An installation report and a walk-through of daily use and care.
What we install
| Equipment | Examples | What we check on site |
|---|---|---|
| Point-of-care analyzers | Siemens RAPIDPoint 500e, epoc, CLINITEK | Bench space, power, network or wireless link |
| Laboratory analyzers | Sysmex XN, HORIBA Yumizen, Fujifilm DRI-CHEM, AutoLumo | Bench load, power, water and drainage where needed, room temperature, LIS |
| Dialysis and critical care | Fresenius 4008S NG, 5008S CorDiax, multiFiltratePRO | Treated water supply, drainage, power and floor space |
Site requirements differ by model; we share the manufacturer’s site-preparation checklist with your quote.
Getting your site ready
Most delays in commissioning come from the site, not the equipment. Before delivery we send a checklist covering the bench or floor space, power sockets and earthing, water and drainage, air-conditioning and network points the model needs.
If something is missing we tell you early, so the engineer’s visit ends with a working system rather than a list of pending items.
After installation
Your operators learn daily runs, QC and maintenance.
Scheduled visits under AMC or CMC keep the system accurate.
Genuine reagents and parts supplied from Bengaluru.
Breakdown support
Calls answered during evenings and weekends.
Related guides
Connecting analyzers to your LIS or HIS
What you need and what you gain.
Preparing your site for a new analyzer
Power, water, space and network checklist.
Frequently asked questions
Milap’s own trained engineers install and commission every system we supply.
It depends on the model and on site readiness. Blood gas analyzers are typically running within 24 to 48 hours of delivery; larger analyzers and dialysis systems take longer.
Space, power and earthing, and for some models water, drainage, air-conditioning and a network point. We send a checklist for your model.
Yes. LIS/HIS interfacing is part of commissioning for analyzers that support it.
Yes. Installation is followed by application training for your users.
This depends on the equipment and the order. Your quotation states what is included.
Planning a new installation?
Tell us the equipment and your site, and we will send a quotation and the site-preparation checklist.