Sysmex CS-1600 automated coagulation analyzer

Sysmex CS-1600 automated coagulation analyzer

A compact, fully automated coagulation analyzer with multi-wavelength detection for clotting, chromogenic and immunoassay tests, at up to 120 PT tests per hour. Milap International supplies, installs and services the CS-1600 for hospital and diagnostic laboratories across Karnataka.

  • Up to 120 PT tests/hour 110 tests/hour for PT and APTT
  • 8 channels clotting, chromogenic and immunoassay
  • 20 parameters analysed at the same time
  • Cap-piercing capped and open tubes on one rack

What is the Sysmex CS-1600?

The Sysmex CS-1600 is a compact, fully automated coagulation (haemostasis) analyzer. It uses multi-wavelength detection at 405, 575, 660 and 800 nm to choose the best wavelength for each test, which reduces the effect of interfering substances, low fibrinogen or lipaemic samples. It runs routine and specialty tests such as PT/INR, APTT, fibrinogen, D-dimer and factor assays.

Key features

Multi-wavelength detection

The optimal wavelength is used for each parameter to reduce interference from lipaemia and similar sample conditions.

Sample volume check

Primary tube volume is checked before analysis, and results are flagged if the anticoagulant ratio looks wrong.

Cap-piercing

Capped and uncapped tubes and cups can share a rack, saving sample handling time.

STAT priority

Urgent samples can interrupt by sample or by rack.

Reagent monitoring

On-board reagent volume and stability alerts, with automatic wake-up and scheduled auto backup.

Accreditation support

Traceability of reagent lots, calibration curves and QC, plus an operation log for audits.

Specifications

SpecificationSysmex CS-1600
Detection principleMulti-wavelength detector for transmitted light at 405, 575, 660 and 800 nm
Channels8 channels for clotting, chromogenic and immunoassays
Parameters20 analysed simultaneously
ThroughputPT: 120 tests/hour; PT/APTT: 110 tests/hour
SamplingContinuous loading of up to 5 racks of 10 tubes; cap-piercing; STAT by sample or rack interruption
Reagent positions28 cooled (15 °C), 12 of them tilted at 10°; 5 at room temperature
Quality controlX-bar and Levey-Jennings; Westgard multi-rule; 40 files of up to 300 points
Data storageUp to 3,000 results with reaction curves
Dimensions / weightMain unit 760 × 540 × 690 mm, about 85 kg

Test menu: PT, APTT, fibrinogen, thrombin time, batroxobin time, factors II, V, VII, VIII, IX, X, XI and XII, lupus anticoagulant screen and confirm, protein C pathway, antithrombin, D-dimer, von Willebrand factor and chromogenic assays. Reagent availability varies by country; ask us for the current menu in India.

Who is the CS-1600 for?

Hospital and diagnostic laboratories with a mid-range coagulation workload that want specialty tests and strong pre-analytical checks on a benchtop analyzer, and labs moving up from a smaller coagulation analyzer.

Installation, training and service

Installation and commissioning

Site check, set-up, calibration and first-run verification by Milap engineers, including LIS connection.

Application training

Hands-on training on PT/INR, APTT, fibrinogen, QC and daily maintenance.

Reagents and controls

Genuine reagents, calibrators and controls for your test menu, supplied from Bengaluru.

AMC, CMC and breakdown support

Preventive maintenance plans, with breakdown calls answered during evenings and weekends.

Frequently asked questions

Clotting, chromogenic and immunoassay tests, including PT, APTT, fibrinogen, thrombin time, batroxobin time, factors II, V, VII, VIII, IX, X, XI and XII, lupus anticoagulant screen and confirm, protein C pathway, antithrombin, D-dimer, von Willebrand factor and chromogenic assays.

Up to 120 PT tests per hour, or 110 tests per hour when running PT and APTT together.

Yes. Capped and uncapped tubes and cups can be loaded on the same rack.

Its multi-wavelength detection uses the best wavelength for each test, which reduces interference from lipaemia and low fibrinogen.

Yes. It keeps traceability information such as reagent lot, calibration curve and latest QC for each result, and an operation log of maintenance and setting changes.

Yes. Milap engineers install and commission the analyzer, connect it to your LIS, train your staff on PT/INR, APTT and QC, and offer AMC or CMC with breakdown support from Bengaluru.

From Milap International in Bengaluru. We supply, install and service the CS-1600 for laboratories across Karnataka.

It depends on your test menu, daily volume, LIS connection and the reagent and service plan. Request a quote and we will send a written price.

Get a quote for the Sysmex CS-1600

Tell us your daily PT/INR and APTT volume and any specialty tests you need, and we will suggest the right Sysmex coagulation analyzer.